港式五张

 

产品列表
您当前所在的位置: 港式五张 >> 产品中心 >> 特种光纤 >> 低双折射旋转光纤

低双折射旋转光纤


LB650 | LB1060 | LB1300 | LB1300RC | PME1300-10

Spun fiber

Rotating glass preform during fiber drawing process produces a waveguide with unique properties: all fiber non-uniformities are averaged along all possible directions,effectively cancelling out total fiber birefringence. With total (but not local)birefringence close to zero, we obtain a fiber that will hold circular polarization (even when bent or twisted). Unlike conventional PM fibers that can hold only linearly polarized light, or annealed fiber that requires special handling, this low-birefringence fiber preserves both linear and circular polarization and can relay it with minimum error over large distances.
Highly-birefringent preforms with incorporated stress produce spun fibers that can withstand significant bending and twisting and hold polarization over large number of coils with reasonable accuracy (without costly annealing process). Polarization accuracy in this case depends on local (instant) birefringence that introduces a small constant error, independent of fiber length.

Elliptical core fiber

Our elliptical-core PME1300-10 fiber provides high polarization extinction and insensitivity to bending and twisting stress. Unlike conventional PM fibers, birefringence of the elliptical-core waveguide has low thermal dependence (10 times lower than Panda).
Due to core geometry the splice losses to a conventional circular-core fiber (SMF, Panda or Bow-tie) are asymmetrical - 0.5 dB for circular-toelliptical coupling and 2.5 dB for elliptical-to-circular arrangement.

Features
- High extinction ratio
- Reduced coupling loss
- Low temperature dependence

Applications
- Fiber-optic gyros
- Optical current sensors
- Fiber amplifiers

Specifications

LB650  LB1060  LB1300  LB1300RC  PME1300-10
Operating wavelength  600 - 900 nm  900 - 1100 nm 1300 - 1600 nm  1300 - 1600 nm  1300 - 1600 nm
Cut-off wavelength  < 580 nm  < 915 nm  < 1280 nm  < 1280 nm < 1280 nm
Beatlength 4 mm  7 mm  13 mm  13 mm  9 mm
Spin period  3 mm  3 mm  3 mm  3 mm 
Attenuation  6 dB/km  6 dB/km  4 dB/km  5 dB/km  8 dB/km
Mode field dimensions  6 um  8 um  9 um  9 um  13 x 8 um
Cladding diameter 125 um  125 um  125 um  80 um  125 um
Coating diameter  250 um  250 um  250 um  200 um  250 um
Core-clad concentricity  < 0.5 um  < 0.5 um  < 0.5 um  < 0.5 um  < 0.5 um 
Cladding offset  < 5 um  < 5 um  < 5 um  < 5 um  < 5 um
Coating material  acrylate  acrylate  acrylate  acrylate  acrylate
Proof test  100 kpsi  100 kpsi  100 kpsi  100 kpsi  100 kpsi
Bending radius > 20 mm  > 20 mm  > 20 mm  > 12 mm  > 20 mm


Major spun fiber parameters can be optimized depending on your application requirements, such as device sensitivity, number and size of fiber coils. 

 

更多产品信息请联系,苏州纳创光电技术有限公司,0512-67626449sales@macdigita.com