锁相放大器（模块式）
LOCK-IN AMPLIFIER MODULES SERIES LIA-MV-150
- Current and voltage input
- Working frequency up to 45 kHz
- Adjustable sensitivity, time constant and phase
- Local and remote control
- Compact and EMI-shielded case
COMPACT MODULE
In modern optoelectronic systems lock-in-amplification is one of the most useful techniques to get rid of unwanted noise and to improve the measurement sensitivity. Therefore we have created a miniaturized, powerful module operating reliably even in heavy noise environments.
TWO WAYS OF PROGRAMMING
The amplifier settings - e.g. phase, gain, time constant - are controlled either by switches directly on the amplifier module or externally using a standard digital I/O computer board. The variable working frequency is determined by an external reference signal which may be e.g. the synchronization signal of a chopper wheel or the modulation signal of a laser. The current input is well suited for amplifying signals from high impedance sources like photodiodes or PMTs while the voltage input can be used to measure signals from low impedance sources like pyros or coils.
APPLICATIONS
- Spectroscopy
- Laser stabilization
- Luminescence, fluorescence, phosphorescence measurements
- Light scattering measurements
- Opto-electronical quality control
- Integration in industrial and scientific measurement systems
- OEM systems
| Model |
LIA-MV-150-S Standard |
LIA-MV-150-D True-Differential Input |
| Voltage Input |
BNC connector Single-ended Instrumentation amplifier Noise 12 nV/√Hz |
Lemo® connector True-differential Instrumentation amplifier Noise 12 nV/√Hz |
| Current Input |
BNC connector Transimpedance amplifier, gain 1 kV/A Noise 4 pA/√Hz |
Lemo® connector Transimpedance amplifier, gain 1 kV/A Noise 4 pA/√Hz |
|
Sensitivity (Full Scale) |
Voltage: 3 µV to 100 mV, switchable in 1-3-10 Current: 3 nA to 100 µA, switchable in 1-3-10 |
|
| Working Frequency | 10 Hz - 45 kHz | |
| Reference Input | ±100 mV to ±5 V, switchable to TTL | |
| Phase |
Adjustable 0° - 360° (8-bit resolution), Temperature drift <0,01°/K |
|
| Demodulator | 50 dB max. dynamic reserve | |
| Time Constants | 3 ms to 10 s, switchable in 1-3-10, slope switchable 6 dB or 12 dB/octave | |
| Output | X [R · cos(angle)], ±10 V full scale, short-circuit protected | |
| Digital Control |
16 TTL, CMOS, opto-isolated 8 Bits phase, 4 Bits time constant, 4 Bits sensitivity |
|
| Power Supply | ±15 V, 100 mA typ. | |
| Case | 170 x 60 x 30 mm (L x W x H), Weight 370 g | |
| View and Download Datasheet | 请点击资料下载！ | |
Power supply via 3-pin Lemo® socket. A mating connector is provided with the device. Optional power supply PS-15 available. For further information please view the datasheet.
Block Diagram LIA-MV-150
苏州纳创光电技术有限公司提供选型支持和售后服务，欢迎广大用户来电咨询0512-67626449，sales@macdigita.com