低电流消耗EDFA模块
EDFA Module with Low Current Consumption (EDFA-16-LC-M)
The Optilab EDFA-16-LC-M Module with Low Current Consumption (LC) is an ideal building block for photonic subsystems and OEM system integration.
Product Overview
The Optilab EDFA-16-LC-M Module with Low Current Consumption (LC) is an ideal building block for photonic subsystems and OEM system integration. Using a specifically qualified FBG stabilized, uncooled pump laser, this LC version of the EDFA module is designed for minimal electrical power consumption and thermal loading. Under normal operating conditions, this module will draw less than 2 W of power (5 V, 270 mA), and it requires only a single 5 VDC power supply for operation. Pump laser protection and alarms are equipped to ensure the reliabilty and safety of the EDFA-16-LC-M, and status monitoring and output power level adjustment is controllable via an RS-232 interface. Contact Optilab for more information.
Applications
- Intelligent EDFA gain block
- OEM integration
- Photonic subsystems
- Fiber optic link amplication
- Instrumentation
Features
- High-gain design allows low input signal level
- Amplifier gain of up to 50 dB
- Gain Flattening Filter (GFF) optional
- Amplifies full DWDM channel range
- 980 nm and 1480 nm single mode pump
- TEC cool pump lasers
- 15+ year operation life
- Automatic Current Control (ACC) standard
- 3 year warranty standard
| Feature Name | Description |
|---|---|
| Optical Specifications | |
| Operating Range | 1528 nm to 1563 nm |
| Output Power | +10 to +16 dBm adjustable |
| Input Signal Level | -15 dBm to +3 dBm |
| Optical Gain | 20 dB typ. @ -5 dBm input |
| Noise Figure | 5.0 dB typ. @ -5 dBm input |
| Input Isolation | 30 dB min. |
| Output Isolation | 30 dB min. |
| Polar. Dependent Gain | 1.0 ps max. |
| Polarization Dependent Gain | 0.3 dB max. |
| Control Modes | ACC |
| Adjustable Features and Output | |
| Control | RS232 for output power adjustment |
| Output Power Adjustment | Adjust by laser bias current |
| Mechanical Specifications | |
| Operating Temperature | -20° to +60° C |
| Power Supply | +5 V DC, 400 mA max. |
| Power Consumption | 2 W max. 1.4 W typ. |
| Fiber Type | SMF-28 |
| Fiber Jacket | 900 μm |
| Connector Type | FC/APC |
| Connector (power and control) | 30 Pin Ribbon IDC Connector |
| Remote Control | RS-232 for laser control, status monitoring |
| Dimensions | 90 mm x 70 mm x 18 mm |
| Accessories Included | 110 V - 240 V AC Adaptor for +5 V DC and cable |